View Single Post
Old 31-07-2008   #4
hn101
New TilersForums Contributor
Points: 107, Level: 2 Points: 107, Level: 2 Points: 107, Level: 2
Activity: 0% Activity: 0% Activity: 0%
 

Join Date: Jul 2008
Posts: 2
Thanks: 0
Thanked 1 Time in 1 Post
hn101 is on a distinguished road
View hn101's Photo Album
Default Re: WIde joint grout - powdery

I grouted a test area with the BAL WJG mixed with GT1 carefully weighed out and measured. A couple of days on it was still not hard i.e. a screwdriver would easily squash into it almost like pressing into biscuit (not really that bad but you get the idea). I think there could be something wrong with that bag of grout. 2 weeks on it was still not hard as grout should be. As I needed it repaired fast I bought MAPEI ultracolor plus for only £3. The literature states swimming pools can be filled after 48 hours rather than the 2/3 weeks stated on BAL WJG. The grout went off so quick I barely had time to get it done! I left it 4 days just to be sure it was cured and treated it with HG waterproofing grout sealer to improve it's water resistance. I intend to completely replace the bathroom in a couple of years so it should be OK till then. Will probably use MAPEI in future. Thanks for your help.
hn101 is offline   Reply With Quote
The Following User Says Thank You to hn101 For This Useful Post:
Dave (31-07-2008)
 
[Output: 11.20 Kb. compressed to 10.56 Kb. by saving 0.64 Kb. (5.74%)]