I have used this leveller from Mapei called Mapei fibre plan.......it is suitable for wood/ply floors ....UFH... etc etc and what a leveller.....
i normally use Arditex on UFH but Ardex have said no to using it on ply floors now..( they never used to)......so i have been hunting around for a good timber one as well as UFH....
Well i was well impressed.... the fibres in it really seem to give it a very strong body........and it flows very well and self levels very good as well unlike Arditex which is hard work yo get it flat and being 2 part Arditex stinks to high heavens as well.....
The Mapei fibre plan is single part requires 6.3 to 6.8 ltrs of water only and is fast to mix and use........
So it has a big thums up from me.........
Water-bored ultra-fast hardening self levelling fibre reinforced smoothing compound.
Applications:
Fiberplan is used for smoothing and levelling from 3 to 10 mm over adequately anchored wood substrates and wooden boarding where good resistance to loads and traffic is required; Fiberplan is suitable for wheeled chair traffic and for heated floors.
Fiberplan can only be used internally.
Smoothing of old and new timber floors: wooden boarding, chip-board panels, plywood, parquet.
Smoothing cement, terrazzo, old ceramic tile, natural stone substrates. Coverage
1.6 kg/m2 per mm of thickness. Packaging
25 kg bags.